High Voltage Probe 10Kv

High Voltage Probe 10Kv. Buy testec high voltage probe, 1000:1, 40mhz, 10kv. Lisn's rf cables antenna bench spectrum analysers emc shielded tents/bags near field probes rf probes tem cells home / optional accessories / rigol rp1010h 10kv high voltage probe £ 432.00 (£518.40 inc vat)

CT4025 10 kV High Voltage Oscilloscope Probe from www.caltestelectronics.com

Available iso 17025 accredited calibration. The only products with 3rd party safety certification (ul, csa, etl) most extensive set of probe accessories. 10kv, for dc, ac (50 to 60hz) voltage, high input impedance:

Source: www.tequipment.net

Consider vitrek at the forefront when it comes to your annual calibrations for the 4700. X1000 attenuation 100 mohms / 1 pf input impedance 40 mhz bandwidth 80 (2.0m) cable length.

Source: www.testequipmentdepot.com

The 4700 and probes come with an iso 17025 accredited calibration certificate with data at no charge. I use a fluke one that is rated at 40kvdc.

Source: www.owon.com.hk

Up to 10kv dc, 8kv ac; If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, b+k precision has higher voltage probes for you.

Source: en.pintech.com.cn

Here are a number of highest rated high voltage probe 10kv pictures upon internet. Both high current and high voltage probes utilize replaceable tips for minimal interruptions to user’s measurements.

Source: www.aliexpress.com

Otherwise will caused to the probe over heat or damage. 0 to 10 kv ac the above voltage can be continuously varied from zero to full value and is.

Source: www.aliexpress.com

The 4700 and probes come with an iso 17025 accredited calibration certificate with data at no charge. Vitrek is accredited to iso 17025 by a2la.

Source: www.owon.com.hk

0 to 10 kv ac the above voltage can be continuously varied from zero to full value and is. Its submitted by dispensation in the best field.

Source: www.ebay.com

Up to 10kv dc, 8kv ac; When the measuring voltage are dc 8 to 10kv, or ac rms 5 to 7kv or ac peak 15 to 20kv, do not exceed 60 seconds on each measurement.

If The Voltages You Need To Measure On Your Oscilloscope Are Above The Specifications Of The General Purpose Probe, B+K Precision Has Higher Voltage Probes For You.

Tip width (at tip point): Otherwise will caused to the probe over heat or damage. Vitrek is accredited to iso 17025 by a2la.

When The Measuring Voltage Are Dc 8 To 15Kv, Or Ac Rms 5 To 10Kv Or Ac Peak 20 To 30Kv, Do Not Exceed 60 Sec.

(probe + wires) 1m (approx. Available iso 17025 accredited calibration. Otherwise will caused to the probe over heat or damage.

0 To 15Kv Dc Or Peak Ac, 10Kv Rms Ac;

When the measuring voltage are dc 8 to 10kv, or ac rms 5 to 7kv or ac peak 15 to 20kv, do not exceed 60 seconds on each measurement. Cleaning clean only the exterior probe body and cables. Only qualified personnel should use this probe.

Free Next Day Delivery Available.

X1000 attenuation 100 mohms / 1 pf input impedance 40 mhz bandwidth 80 (2.0m) cable length. The 4700 and probes come with an iso 17025 accredited calibration certificate with data at no charge. Disconnect the probe tip from the high voltage source before removing the ground clip lead.

This High Voltage Probe Is Designed To Be Used By Personnel Who Are Trained, Experienced, Or Otherwise Qualified To Recognize Hazardous Situations And Who Are Trained In The Safety Precautions Necessary To Avoid Possible Injury When Using Such A Device.

Both high current and high voltage probes utilize replaceable tips for minimal interruptions to user’s measurements. I use a fluke one that is rated at 40kvdc. Shop our latest oscilloscope test probes (voltage / frequency) offers.